Description
The P1-2X12 is a dual P1 12�?vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8�?MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.
Features:
Constructed with 5/8″ MDF
Proprietary high-flow, low-noise port
High current binding posts
Specifications:
Woofer Quantity: 2
Nominal Impedance (ea): 2-Ohm, Internally wired to create a 2-Ohm amplifier load
Power Handling (Watts RMS): 500 Watts RMS, 1000 Watts Max
Enclosure Material: 5/8″ MDF (Medium Density Fiberboard)
Dimensions: 15.125″ x 33.875″ x 15.75″ (38.4cm x 86cm x 40cm)
Woofer Size: 12″
Enclosure Type: Vented
Speaker Connector: Up to 10 AWG compression terminals
Shipping Weight: 70.9 Lbs. (32.15 kg) The P1-2X12 is a dual P1 12�?SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level) The P1-2X12 vented loaded enclosure is Internally wired to create a 2-Ohm amplifier load with power handling of 500 Watts RMS / 1000 Watts Max Punch Loaded enclosures are constructed with durable 5/8″ MDF material and feature a proprietary high-flow, low-noise port with high current binding posts for maximum signal flow to the speakers inside The P1-2X12 loaded enclosure measures at 15.125″ x 33.875″ x 15.75″ (HxWxD) Famous build quality with a full 1-year warranty when purchased from an authorized reseller Speaker Connector: Up to 10 AWG compression terminals Tear and fatigue resistant poly cotton spider High temperature 2″ 4 layer voice coil with spun laced Nomex insulating reinforcement collar Optimized motor magnetics with extended pole piece and bumped backplate Fatigue resistant and reduced strain stitched on flexible lead wire design Multi point high temperature/high strength neck joint bonding High quality 16 gauge compound bend frame geometry Semi flexible PVC removable protective motor cover Proprietary spider venting/cooling Decorative ABS trim ring Enclosure Material: 5/8″ MDF (Medium Density Fiberboard) Frequency Response: 25 250 Hz Sensitivity: 86 dB CEA 2031 Compliant Condition: Brand New! Item Weight: 69.85 lbs. Part Number: **P1 2X12** 1 Year Manufacturer Warranty
